@ Complete plastic injection Machinery @
@ @ Index   @ Page: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.     

                               Plastic Injection Machinery             

Item No. : SW-90BB~ 350BB

Product Name: Bakelite Injection Molding Machine

Description :

*Choice of clamping force 90 tons~ 350tons.
*Advanced microprocessor control provides powerful function and is easy to operate.
*Low Pressure mold clamping for mold protection.
*Barrel heating system features a combination of oil, electric and water heater.
*High-speed clamping mold circuit reduces cycle time and saves power.
*Multistage injection and pressure control assures precision molding .
*Memory capacity of 100sets molding data.

Specification:

* The Steel plate, combined with the        * Temperature controller provided at      * Outstanding temperature 

use of heat insulation plate provides           front end of barrel to ensure optimum     retaining performance is

excellent heat insulation and prevents        temperature range while upgrading         achieved through electric 

heat generation on the plated.                    product quality.                                       heating, water cooling and oil 

                                                                                                                                  temperature retaining. 

* GENERAL ACCESSORIES

  . Mold temperature controller

  .Bakelite board

  . Steel plate for platen

  . Mold clamp

  . Tool box one set

  . Hydraulic ejector rod

  . Hopper

  . Anti- Vibration foundation pads

  . Cooling water manifold device

@

MODELS

UNIT

SW-90BB SW-120BB SW-150BB SW-200BB SW-250BB SW-300BB SW-350BB
INJECTION SYSTEM INJECTION DIAMETER mm 32

36

36 40 40 45 45 50 50 55 55 60 60 65
INJECTION CAPACITY cm3 145 183 203 251 289 366 397 491 530 641 712 848 904 1061
SHOT SIZE (PS) g 175 221 246 303 349 441 480 592 640 774 860 1023 1092 1281
oz 6.2 7.8 8.7 10.7 12.3 15.5 16.9 20.8 22.5 27.3 30.3 36 38.5 45.1
INJECTION PRESSURE kg/cm2 1914  1512 1842 1492 1877 1483 1839 1490 1882 1555 1916 1610 1867 1591
INJECTION RATE cm3/sec 69 81.7 92.3 114.1 115.6 146.4 147 181.9 176.7 213.7 203.4 242.3 258.3 303.1
INJECTION STROKE mm

180

200 230 250 270 300 320
INJECTION SPEED mm/sec 85.7 90.9 92 92.6 90 85.7 91.4
SCREW SPEED rpm 0~400 0~400 0~260 0~220 0~200 0~160 0~160
CLAMPING SYSTEM CLAMPING FORCE ton 90 120 150 200 250 300 350
CLAMPING STROKE(MAX) mm 300 350 400 450 480 520 560
SPACE BETWEEN TIE BARS(HxV) mm 360x360 400x400 430x430 480x480 520x520 570x570 620x620
MOLD THICKNESS(MIN-MAX) mm 100~400 120~450 120~500 150~550 150~600 200~650 200~700
EJECTOR FORCE ton 4.3 4.3 5.3 5.3 6.1 6.1 7
EJECTOR STROKE mm 100 100 140 140 170 170 190
OTHER DRIVE MOTOR HP(kw) 10(7.5) 15(11.2) 20(15) 25(18.6) 30(22.3) 40(30) 40(30)
OIL TANK CAPACITY U.S.gal 50 65 80 100 120 150 170
MACHINE DIMENSION (LXWXH) m 4.3X1.25X1.6 4.8X1.3X1.65 5.2X1.35X1.7 5.6X1.4X1.75 6X1.5X1.8 6.5X1.6X1.9 7X1.7X2
NET WEIGHT ton 3.6 4.6 5.8 7.5 9 11 13

          *Specifications subject to change without notice.

@ Category  <<Prev  1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Next >> @ TOP

@