@ Complete plastic injection Machinery @
@ @ Index   @ Page: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.     

 Plastic Injection Machinery       

Item No. : SW-90B~350B , SW-400B~1200B

Product Name : Plastic Injection Molding Machine

Description:

*Choice of clamping force 90 tons ~1200tons.
*Advanced miroprocessor control provides powerful function and is easy to operate.
*5-Point double toggle system.
*Outside mounted oil filter screen for convenient cleaning.
*Electrical components are CE certified.
*Memory capacity of 100sets of molding data.
*Low pressure mold clamping for mold protection.
*Employing proportional flow control system ensuring high-accuracy stability and energy savings.
*Integrated hydraulic circuit provides convenient servicing, reduced oil temperature, and prevents loss.

Specification:

SW-90B~350B

MODELS

UNIT SW-90B SW-120B SW-150B SW-200B SW-250B SW-300B SW-350B

Injection Unit

Screw diameter mm 28 32 36 32 36 40 36 40 45 40 45 50 45 50 55 50 55 60 55 60 65
Injection pressure kg/cm2 2500 1910 1510 2330 1840 1490 2310 1875 1480 2325 1835 1490 2320 1880 1555 2315 1910 1610 2220 1865 1590
Theoretical shot volume cm3 111 145 183 160 203 250 234 289 366 314 397 491 429 530 640 589 712 848 760 904 1060
Shot weight (ps) grams 99 129 163 144 180 224 209 258 327 280 354 438 383 473 572 526 635 757 678 807 947
Injection rate cm3/sec 52 69 81 73 92 114 93 115 146 116 147 181 143 176 213 168 203 242 217 258 303
Plasticizing capacity (ps) kg/hr 30 34 40 38 46 52 51 59 67 64 71 82 78 90 101 95 110 128 120 138 153
Clamping Unit Clamping force Tons 90 120 150 200 250 300 350
Mould opening stroke mm 330 380 430 480 525 570 620
Space between tie bars mm 360x360 400x400 430x430 480x480 525x525 565x565 620x620
Platen dimensions
H x V
mm 540x540 595x595 660x660 720x720 790x790 850x850 930x930
Mould height
min.-max.
mm 130-400 140-440 150-500 160-540 180-580 200-610 220-670
Ejector Stroke mm 100 100 140 140 170 170 190
Other Pump driving motor HP/kw 15/11.2 20/15 25/18.6 30/22.3 40/30 50/37.2 50/37.2
Heating capacity kw 4.6 6.1 7.9 11.5 13.7 17.4 19.8
Thermo controller set (0-399)-3 (0-399)-4 (0-399)-4 (0-399)-4 (0-399)-5 (0-399)-5 (0-399)-5
Oil Tank Capacity U.S. gal 50 65 80 100 120 150 170
Machine dimensions 
(L x W x H)
m 4.3x1.25x1.6 4.8x1.3x1.65 5.2x1.35x1.7 5.6x1.4x1.75 6x1.5x1.8 6.5x1.6x1.9 7x1.7x2
Machine weight kg 3560 4450 5500 7200 8800 10600 12400

MODELS

UNIT SW-400B SW-500B SW-600B SW-800B SW-1000B SW-1200B

Injection Unit

Screw diameter mm 60 65 70 70 75 80 80 85 90 90 95 100 90 95 100 110 115 120
Injection pressure kg/cm2 2370 2020 1740 2154 1877 1649 2062 1826 1629 2082 1868 1686 2004 1815 1655 2008 1837 1687
Theoretical shot volume cm3 961 1128 1308 1462 1678 1910 2110 2382 2670 2925 3259 3611 4161 4587 5034 5509 6021 6556
Shot weight (ps) grams 858 1007 1167 1305 1498 1704 1883 2126 2384 2611 2909 3223 3714 4094 4493 4917 5374 5851
Injection rate cm3/sec 234 275 319 281 322 367 440 496 556 470 525 575 540 596 655 573 627 682
Plasticizing capacity (ps) kg/hr 160 175 190 200 221 244 260 276 295 310 332 350 375 420 455 505 552 593
Clamping Unit Clamping force Tons 400 500 600 800 1000 1200
Mould opening stroke mm 600 700 800 900 1140 1430
Space between tie bars mm 700x680 770x742 860x800 930x850 1060x1060 1260x1160
Platen dimensions 
H x V
mm 1030x1010 1130x1103 1280x1260 1370x1290 1560x1560 1820x1720
Mould height min.-max. mm 250-750 250-850 300-900 350-1000 400-1140 500-1430
Ejector Stroke mm 190 220 250 280 300 330
Other Pump driving motor HP/kw 60/44.7 60/44.7 80/59.7 90/67.1 110/82.1 125/93.3
Heating capacity kw 22.8 28.4 33.4 37 45 52
Thermo controller set (0-399)-5 (0-399)-6 (0-399)-6 (0-399)-7 (0-399)-7 (0-399)-7
Oil Tank Capacity U.S. gal 200 250 300 350 350 400
Machine dimensions 
(L x W x H)
m 7.8x1.85x2.2 8.6x2x2.4 9.5x2.2x2.6 10.5x2.4x2.8 11.8x2.4x2.45 13.8x2.8x2.6
Machine weight kg 17000 22000 29000 38000 46000 58000

         *Suitable electricity : AC 220V.60Hz *Specifications subject to change without notice.

@

SW-400B~1200B

@MODELS UNIT SW-420MB SW-520MB SW-650MB SW-800MB SW-1000MB SW-1200MB SW-1600MB SW-2000MB

Injection Unit

Screw diameter mm 60 65 70 70 75 80 80 85 90 90 95 100 90 95 100 110 115 120 130 140 150 130 140 150
Injection pressure kg/cm2 2370 2020 1740 2154 1877 1649 2062 1826 1629 2082 1868 1686 2004 1815 1655 2008 1837 1687 1990 1720 1500 1990 1720 1500
Theoretical shot volume cm3 961 1128 1308 1462 1678 1909 2110 2382 2671 2925 3256 3611 4161 4587 5034 5509 6021 6556 9286 10770 12363 9286 10770 12363
Shot weight (ps) grams 858 1007 1167 1305 1498 1704 1883 2126 2384 2611 2909 3223 3714 4094 4493 4917 5374 5851 7893 9154 10508 7893 9154 10508
Injection rate cm3/sec 234 275 319 281 322 367 440 496 556 471 525 571 540 596 655 573 627 682 1180 1370 1390 1180 1370 1390
Plasticizing capacity (ps) kg/hr 160 175 190 200 221 244 260 276 295 310 332 350 375 420 455 505 552 593 625 720 810 625 720 810
Clamping Unit Clamping force Tons 420 520 650 800 1000 1200 1600 2000
Mould opening stroke mm 760 890 930 1020 1140 1430 1680 1940
Space between tie bars mm 710x710 780x780 860x860 930x930 1060x1060 1260x1160 1560x1420 1820x1720
Platen dimensions 
H x V
mm 1060x1060 1080x1080 1290x1290 1380x1380 1560x1560 1820x1720 2200x2060 2500x2400
Mould height min.-max. mm 260-760 300-890 340-980 380-1000 400-1140 500-1430 550-1650 650-1900
Ejector Stroke mm 200 230 260 300 300 330 350 400
Other Pump driving motor HP/kw 60/44.7 75/55.8 80/59.7 90/67.1 110/82.1 125/93.3 180/134 200/149
Heating capacity kw 22.8 28.4 33.4 37 45 52 60 72
Thermo controller set (0-399)-5 (0-399)-6 (0-399)-6 (0-399)-7 (0-399)-7 (0-399)-7 (0-399)-8 (0-399)-9
Oil Tank Capacity U.S. gal 200 250 300 350 350 400 500 600
Machine dimensions 
(L x W x H)
m 7.3x1.82x2.2 8.4x2.1x2.4 9.1x2.15x2.4 9.9x2.4x2.4 11.8x2.4x2.45 13.8x2.8x2.6 14.8x3.3x3.4 17.4x3.5x3.7
Machine weight kg 16200 21000 27400 36000 46000 58000 96000 136000

         *Suitable electricity : AC 220V.60Hz  *Specifications subject to change without notice.

Item No. :SW-120BS ~300BS

Product Name: 2 Color Plastic Injection Molding Machine

Description:

*Choice of clamping force 120 tons~300tons
*Advanced microprocessor control provides over 6 patterns.
*5-Point double toggle system.
*The movable platen is equipped with dry bearings and controlled by precision linear transducer, ensuring maximum repeatability and positioning accuracy.
*High-Speed mold clamping circuit reduces cycle time and saves power.
*Memory capacity of 100sets molding data.

Specification:


   

MODELS

UNIT

SW-120BS SW-150BS

SW-200BS

SW-250BS SW-300BS
INJECTION SYSTEM INJECTION ROD DIAMETER mm 28

32

32 36 36 40 40 45 45 50
INJECTION CAPACITY cm3 111 145 161 203 234 289 314 397 429 530
SHOT WEIGHT (PS) g 99 129 144 181 209 258 280 354 383 473
oz 3.5 4.5 5.1 6.4 7.4 9.1 9.9 12.5 13.5 16.7
INJECTION PRESSURE kg/cm2 2170 1661 2181 1723 2317 1877 2520 1991 2322 1881
INJECTION STROKE mm 180 200 230 250 270
CLAMPING SYSTEM CLAMPING FORCE ton 120 150 200 250

300

MOULD OPENING STROKE mm 380 430 480 525 570
SPACE BETWEEN TIE BARS mm 400x400 430x430 480x480 520x520 570x570
PLATEN DIMENSIONS (H X V) mm 595x595 660x660 720x720 790x790 850x850
MOLD HEIGHT (MIN. MAX.) mm 140~440 150~500 160~540 180~580 200~610
EJECTOR STROKE mm 100 140 140 170 170
MISC. PUMP DRIVING MOTOR HP(kw) 20(15) 25(18.6) 30(22.3) 40(30) 40(30)
HEATER CAPACITY kw 13.2 16.1 19.2 23.5 28.5
THERMO CONTROLLER set (0~399)x8 (0~399)x8 (0~399)x8 (0~399)x8 (0~399)x10
OIL TANK CAPACITY U.S. gal 50 80 100 120 150
MACHINE DIMENSION (LxWxH) m 4.8x1.3x1.65 5.2x1.35x1.7 5.6x1.4x1.75 6x1.5x1.8 6.5x1.6x1.9
NET WEIGHT ton 4.3 5.8 7.5 9 11

                                        *Specifications subject to change without notice.

@ Category  <<Prev  1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Next >> @ TOP